Dynamic Balancing

Unbalance is a condition when a rotating part's mass does not lie at the center of rotation. This causes a force (vibration) at the frequency of rotation. If the vibration is significant, it can shorten the life of the bearings and damage other parts of a machine. Unbalance can usually be corrected at your site without removing the rotor. Weights can be attached in various ways or material can be removed by grinding or drilling. This moves the center of mass back to the center of rotation and reduces the vibration.

As long as there is access to the rotor, dynamic balancing in the field eliminates the need to remove, transport, and reassemble a machine which can be very costly. Dynamic Balancing in the field - in the rotors existing bearings and mounting structure with process variables taken into consideration will usually have a better end result.

Dynamic Balancing can be performed on all kinds of machinery

                 All fans:                                                                                            We also balance:

                    Cooling Towers                                                                                                     Land Clearing Machinery
                  Air Handlers                                   Dynamic balancing of all                                Wire Winding Machinery
                    Scrubber Fans                                   rotating equipment                                      Hammer Mills
                    Exhaust Fans                                                                                                           Pumps & Motors
                    Boiler Fans                                                                                                               Flywheels
                    Dust Collector Fans                                                                                                  Machine Tool Spindles
                    All types of Fans                                                                                                       More......


           On site MIG and STICK welding available for tub grinders, mulchers, mowers, brush cutters,
                                                   and all balancing jobs requiring welding.